Go to home page
Non-dedicated controls

ETC6200 series

ETC 6200The ETC6200 is a non-dedicated versatile control that can be used alone or in conjunction with other ETC products, including ETC6000, ETC1200, ETC3000 and ETC2800. It uses RS485 for comms and in some ways is similar to a PLC, but has no ladder logic to contend with. Logging is an option.
    ETC's innovative software makes programming the control a pleasure and extremely time efficient.
Unlike a PLC, your control solutions are protected and cannot be copied by third parties.
    ETC6200's may be linked together ensuring that no application is function limited.

Hardware features

  • 10 x ETC CAN servo drivers max (configuration dependent)
  • 4 x Line powered relay o/p
  • 5 x Common suppy voltfree o/p
  • 3 x High voltage digital inputs > 100Vac
  • 10 x Low voltage digital inputs (voltfree contact closure)
  • 2 x Universal inputs unisolated 4 to 20mA or, 0 to 5V
  • 5 x Unisolated 4 to 20mA inputs
  • 3 x 4 to 20mA isolated outputs
  • 3 x Low voltage (12V) frequency input range 20 - 1000Hz
  • 3 Alarm output relays
  • Isolated RS485 communications
  • RS485 for uploading program

More functions becoming available

Software functions and logic blocks

  • Digital inputs
  • Digital outputs
  • Universal inputs
  • Analogue outputs
  • Logic High
  • Logic Low
  • Option Parameter
  • Register Digital inputs
  • Register Digital outputs
  • Register Analogue inputs
  • Register Analogue outputs
  • CAN Digital inputs
  • CAN Digital outputs
  • CAN Analogue inputs
  • CAN Analogue outputs
  • ETC inputs to ETC inputs (eg from ETC3000, ETC1200 or
    ETC6000)
  • ETC control digital
    • ex.1 trim on/off
    • ex.2 change to second boiler set-point
  • ETC control analogue
    • ex.1 change boiler set-point value
    • ex.2 modulate burner
  • AND 2, 3, 4, 5 inputs
  • OR 2, 3, 4, 5 inputs
  • COUNTER up
  • COUNTER down
  • Binary decoder
  • Binary encoder
  • INVERT
  • TOGGLE
  • SET/RESET latch
  • ADD
  • SUBTRACT
  • MUTIPLY
  • DIVIDE
  • >
  • <
  • EQUALS
  • WINDOW
  • AVERAGE
  • MAX of inputs connected
  • MIN of inputs connected
  • Multiplexer
  • CONSTANT
  • De-multiplexer
  • Signal swop
  • Freeze
  • Limit check with hysterisis
  • PID
  • Interpolate
  • Polynominal
  • Rolling Average
  • On / Off DELAY
  • MONOSTABLE
  • Servo position
  • Up / Down Drive
  • Curve
  • Real Time Clock
  • Logging

Want to know more? Then download the PDF datasheets.

Other products in this section are:

 

 

Launch the remote control